HP Printer Won't Turn On — How to Fix HP Printer Power Issues

HP Printer Won't Turn On? Here's How to Fix It

If your HP printer isn't powering on at all, here are the steps to diagnose and fix the problem.

Step 1 — Check the power connection:

• Make sure the power cord is firmly plugged into both the printer and the wall outlet

• Try a different wall outlet — the current one may be faulty

• Avoid using power strips or extension cords — plug directly into the wall

Step 2 — Perform a power reset:

1. If the printer is on but unresponsive, press and hold the power button for 10 seconds

2. Unplug the power cord from the printer

3. Wait 60 seconds

4. Plug the power cord back in and press the power button

Step 3 — Check the power cord:

• Inspect the power cord for damage — fraying, cuts, or bent pins

• If damaged, replace the power cord (use only an HP-approved cord for your model)

Step 4 — Check for error lights:

• Some HP printers show a blinking light instead of powering on fully when there's an internal error

• Note the light pattern and check the HP support page for your model's light code guide

Step 5 — Hard reset the printer:

1. With the printer off, unplug the power cord

2. Wait 2 minutes

3. Hold the power button on the printer for 15 seconds (while unplugged)

4. Release the button, plug in, and power on

HP printer still won't turn on? This may indicate a hardware issue — power board or fuse failure. Call 1-800-417-4203 — our HP printer support team diagnoses power issues on all HP models 24/7.